Projects Supreet Yadav likes and follows

Sort by:

Use a Kodak projector and DSLR camera to automate digitizing slide photography

Kodak Slide Projector Scanner

bryan-howard Bryan Howard

The 2018 Hackaday Prize

Chapter 1 : Raspberry Pi Zero W Stepper Motor Module Balancing Robot and 3d Printer - CNC Machine

Raspberry PI Module for Robotics Mythololgy (1)

reginald-sourn Reginald Sourn

Hackaday Prize 2019

This projects converts a Bobby-Car (children's ride-on toy) to electric by using 4 Hoverboard motors, VESC controllers and an ESP32

Electric Bobby-Car

peter-ptzi Peter Pötzi

Hackaday Prize 2020

Mission "Wifi" Impossible > Bring Long Range 5G and 2.4 G WiFi Backed By A 1 Gigabit Fiber To The East Brainerd EF-3 Tornado Disaster area.

Open Sky Anchor WiFi Drone Brings The GIG

josh-starnes Josh Starnes

A compact modular design of the strain wave gear for general robotic applications.

Compact Strain Wave Gear Actuator(s)

Getting Marlin to run on the Monoprice Mini/Malyan M200.

Monoprice Mini Marlin 2.0 Support

jc-nelson J.C. Nelson

Emulate a small size ROM with a RAM and Arduino with Intel-HEX interface

ROM-emulator

fjkraan fjkraan

Turn your N64 controller into a bluetooth gamepad

N64 bluetooth gamepad

shyri-villar Shyri Villar

Here I build a external GNSS module for mobile devices without or unsatisfactory navigation GNSS option.

GNSS bluetooth module with u-blox NEO8N

Hackaday.io code of conduct

Code of Conduct

12 Degrees of Freedom, runs on Windows/Mac/Linux/Android/iOS, 1Kg+ Payload

TiBeast - Quadrupedal Robotic Dog

celestial-robotics Celestial Robotics

A smart display that can be embed into a wall socket that controls all the IOT device in home.

Smart Home Display IOT

ANANTHAKRISHNAN U S

This adds an extra layer of security against microphone attacks by allowing the user to ground out the data line shared by the microphones.

Echo Dot Hardware Microphone Mute Modification

andrew-peters Andrew Peters

USB-PD sink with headers compatible with breadboard. Features a fixed 3.3V supply and one-click voltage selection without incorporating MCUs

Low-cost USB-PD Sink for Breadboard (and More)

The 2017 Hackaday Prize

Upper body exoskeleton for exercise in VR.

Exercising Exoskeleton

2021 Hackaday Prize

A DIY digital stereo-microscope. Low cost. Open source software and hardware. For electronics inspection, soldering work and more.

Stereo Ninja

fablab-mnchen FabLab München

Detect your LAN from browser

LAN Detector

dev-lab dev-lab

Make IoT-based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the IR Remote, manual switch & Wi-Fi.

Home Automation using Blynk IR Remote & ESP32

This project uses a 3D Printed Speaker "Cone" and Coil Bobbin as an audio exciter

3D Printed Audio Exciter

If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide

NodeMCU Home Automation (ESP8266)

diy-guy-chris DIY GUY Chris

newest edition of its Power over Ethernet (PoE) HAT. The Raspberry Pi PoE+ HAT outperforms its predecessor by adopting the 802.11at PoE+...

The Raspberry Pi PoE+ HAT Has Been Announced.