2020 Hackaday Prize Finalists

i. Build a working prototype of your project.
ii. Create a video, between two (2) minutes and five (5) minutes in length that shows
a working prototype. The video should describe the challenge it addresses and
demonstrate how it facilitates the solution. The video does not need to be “studio
quality,” but it should “sell” the project to non-technical viewers. Upload the video
to YouTube, Vimeo, or Youku and tag the video with the keyword: HackadayPrize. Add the video link to the “Contest Entry Videos” section of your Project Profile
found by clicking “Edit Project”. Here is a graphic example of the video link
submission section: https://goo.gl/qarDfo
iii. Project Profile: On the Project Profile:
a. Link to the video
b. Post high-resolution photos of the project inside and out
c. Update and add detail to information entered during the Entry Round
d. Show at least ten (10) Project Log updates
e. Post a components list that is complete with a bill of materials for one unit
f. Post complete schematics and documented input and output requirements
and specifications for your module/design

Discussions

Phil Malone wrote 09/12/2020 at 14:29

Thanks for posting this. It's a great selection of projects. While checking them out, I noticed that one of the links is a repeat of the one above it. Thought you might like to correct it. Wearable, Soft Robotic Exoskeleton Gloves goes to the Magpie project.

Are you sure? yes | no

Jacques Gagnon wrote 09/14/2020 at 18:16

"naminukas" link to "DIY hobby servos quadruped robot" too

Are you sure? yes | no

zzanzare wrote 09/18/2020 at 02:57

5 days no fix, so I went there and found the right links:

https://hackaday.io/project/171772-wearable-soft-robotic-exoskeleton-gloves

https://hackaday.io/project/170788-naminukas

Are you sure? yes | no

Jacques Gagnon wrote 09/18/2020 at 13:23

You would think the HackadayPrize is their big thing and they would put some time to read the comments here and make the fixes (I've been told this contest page is the best place to contact them early june or july). But look like their focus is on HackadayU & Remoticon.

Are you sure? yes | no

Josh Starnes wrote 09/10/2020 at 00:16

congratulations!

Are you sure? yes | no

Minas Liarokapis wrote 09/09/2020 at 20:04

Congratulations everyone!

Are you sure? yes | no

benw wrote 09/09/2020 at 20:01

Congratulations ^^

Are you sure? yes | no

Jacques Gagnon wrote 09/09/2020 at 19:36

Congrats everyone!!!!

Are you sure? yes | no

CalEarth

Conservation X Labs

Field Ready

UCPLA

Wildcard

Community Vote (Bootstrap) Winners

2020 Hackaday Prize Winners

Discussions

Become a Hackaday.io Member