Close

Recent Projects

Peering into the soul of this obscure machine
Project Owner Contributor

ROM Disassembly - Cefucom-21

ziggurat29ziggurat29

An experimental board for researching possibilities of retrofitting e-inks into netbooks
Project Owner Contributor

E-ink driver with a single channel LVDS input

tomek-szczsnyTomek Szczęsny

I design my own digital caliper based on STM32F103 blue pill (and more).
Project Owner Contributor

DIY Digital Caliper - CALIPATRON

dimitarDimitar

The GGreg20_V3 Ionizing Radiation Detector is a new-generation ready-to-use device with an SBM-20 Geiger tube and pulse counting output
Project Owner Contributor

GGreg20_V3 Ionizing Radiation Detector

iot-devices-llcIoT-devices, LLC

A brain transplant for my well-used Siemens SE64E336EU dishwasher.
Project Owner Contributor

ESP32 Dishwasher

david-h-bronkeDavid H. Bronke

Low cost 2 phase stepper motor controlled micrometer actuator for micron scale linear motion
Project Owner Contributor

Motorized Micrometer Actuators

baird-bankovicBaird Bankovic

ANTIRTOS_C - a native C implementation of ANTIRTOS is coming...
Project Owner Contributor

ANTIRTOS_C. No RTOS Need. U Will C

aleksei-tertychnyiAleksei Tertychnyi

Using an existing game and creating our own alternative controllers
Project Owner Contributor

KartCar

maleluceMaleluce

Open-source microcontroller system based on an Raspberry Pi Pico core processor and stackable interface boards
Project Owner Contributor

The Quub

robrob

Refreshable Braille Display powered by PCB electromagnets
Project Owner Contributor

Refreshable Braille Display

basim-cheema-sabirBasim Cheema-Sabir

A series of m68k computers designed to run Linux
Project Owner Contributor

Mackerel 68k Linux Computer

colin-mColin M

A self-contained AIS GNSS server for small boats
Project Owner Contributor

Self-contained AIS GNSS receiver server

richard-van-fossanRichard Van Fossan

The tadpoles have returned!
Project Owner Contributor

Raising Tadpoles 2024 edition, third season

mcunerdmcu_nerd

My rowing machine is almost useless without a $30 per month subscription. I would like to change that.
Project Owner Contributor

Jailbreaking a rowing machine

tom-callahanTom Callahan

Accessibilità aims to do what Arduino did for Microcontrollers for accessibility electronics and interfaces for Wheel chairs and similar
Project Owner Contributor

Accessibilità

avrAVR

A connected control system for all agriculture applications based on RS485 control nodes and multiple wireless sensor networks
Project Owner Contributor

Agricoltura - IO

avrAVR

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday