-
Vintage sunvisor car telephone with cars histories
07/07/2021 at 21:28 • 0 commentsHi, this one of my first post and is about a car i bought a few years ago, normally i works on cars but with in the pass of the time i get involve with all the electric/electronic stuff of the cars like wiring, Electronic Control Modules, Electronic Fuel Injection, Standalone ECU´s (Speeduino is one of my favorites) and all about the electric stuff in old cars and modern cars.
So in the 90´s Chrysler offer a special product for the luxury cars called the VisorPhone.
the VisorPhone was a dealer-installed optional mobile phone that was embedded in the driver-side sun visor. It featured 33 buttons, a volume bar and LCD screen.
This was one of the most coolest options back then but was expensive ASF! $900 Of the 90´s bucks.
![]()
In 2017 i bought one of the rare Chrysler Phantom R/T 16v DOHC turbo engine for parts in $700 bucks, i get it because i was fixing a Dodge Spirit R/T with the same engine and manual transmission, this Spirit have a blown transmission and is not easy to find an A568 manual gearbox in good conditions on this days so was more easy get a complete car for parts.
![]()
When i finish the Dodge Spirit i keep it for a few month and after that i sold it because was completed that project but i still have the Chrysler Phantom, i was going to get it to the junkyard because i don't need it more and because it has a normal 8v SOHC 2.5 turbo ll engine, so i never inspect the car and the papers until 2020 (Because quar-on-tine).
So i start looking the car and it was zero rust, zero crashes, good one piece body one repainted over original paint and when i see the documentation of the car was a factory full equipment "all-with-extra-abocado-in-everything" and a factory Visorphone, so all this moment was a good car i was going to send to the scrapyard.
After that i start the mission of get it running, good looking, all factory parts daily driver car even if doesn't have the original engine because was for me and it´s a good restomod i want to make.
In my country only 80 VisorPhones was sold so this was going to be a hard to find piece of puzzle, first i get the original Infinity stereo with the amp (im going to make another post for that), fix the burned body harness, fix the pop up headlights but i never find a VisorPhone UNTIL NOW.
A few days ago a get a New Old stock VisorPhone in box, when i found the post i was in the no way mood for like a hour, was all 2020 and what it goes of the 2021 since a made this post i was looking for this and finally i have one and is so damn cool but now this is what i came here for the first reason.
![]()
I love it, its a hard to find but i know there is a little big problem with all of this.
This telephone is probably working but is a CDMA system.
![]()
So the CDMA system is not working more because new technologies are replacing this network and there is not more companies who gives this service
![]()
And my mission here is there is a possibility to make it run now with gsm tech? i know is not possible to change it but maeby arduino hack the $hit of it?
![]()
I was checking the telephone module if was in good shape but is complete new
![]()
Was made by OKI telecom in the 90's
![]()
And why make it, because could be possible
![]()
So this is all the old tech
![]()
So what you think my community, could be possible? or im trying to do something crazy?









