SIM_ill_itude

Description

Hi everyone,
We are Mike, Sofiane and Inès, 3 student from ESME Sudria (French engineering school) in first year. We are doing our first project in the perspective of the International Track. This is a medical project that applies to elderlies and disabled person, because we think they are a a minority, not so small, forgotten by the world. We want to protect them and give them a better life.

Enjoy 😉

Details

The project consists in a Fall Detector in the form of a bracelet, composed by an IMU and a vibrator, which detects when the user falls (as a collapse, a harsh muscle fatigue or a violent bout of epilepsy).

When a fall is detected, the vibromotor starts to vibrate until you stop it by clicking on the button.

After 1 minute, if it's still vibrating, an alert is send to the emergencies services with the medical form of the user and his location.

Nonetheless, to test the Fall Detector without disturbing them, we simulated them with a Tweet.

Files

Code_Fall_Detector_Final_Windows_32bit.RAR

Find the Fall Detector Programm as a .exe or in Processing (in Source Folder). Please make sure that you have Processing 3+. If you want a 64 bit please ask Mika in private (Over than 50MB I can't put it on hackaday files.) We hope you'll like it Enjoy !

RAR Archive - 4.96 MB - 06/13/2018 at 21:18

Download

Movuino_ArduinoFirmware_Adrien_Husson_CRI_Paris.rar

The arduino file to intialize your Movuino Card. Credits to Adrien Husson, Kévin Lhoste and all the person who created this at the CRI Paris.

RAR Archive - 6.43 kB - 06/13/2018 at 21:38

Download

Carte_Verso.jpg

You're looking at the front of the microcontroleur. With the LEDs and the USB Port, you can interact with a computer, a plug source and the user.

JPEG Image - 1.18 MB - 05/24/2018 at 20:32

Preview

Ensemble_Code.jpg

Screen of the first step of the code. How can the card detect when you're falling.

JPEG Image - 642.97 kB - 05/24/2018 at 20:32

Preview

Programme_Fall.jpg

This show the interface of Processing.

JPEG Image - 560.79 kB - 05/24/2018 at 20:32

Preview

Components

1 × Movuino Arduino Microcontroleur with buzzer, battery and led

1 × 3D Printed Box (Ultimaker3) To put the movuino in

1 × Bracelet Tissu Bracelet

1 × USB Cable Electronic Components / Misc. Electronic Components

1 × Button Mechanical Components

Project Logs

Collapse

When you use your friend for a crash test :)
Sofiane • 06/13/2018 at 22:24 • 0 comments

Thanks Racime 😉
Before the final presentation
Mika • 06/13/2018 at 17:16 • 0 comments

Finally, we did it !!!! After 3 harsh months, we almost succeed.
Bruuuuh : A SIM_ill_itude Horror Story
Mika • 06/08/2018 at 18:31 • 0 comments

Buzzer module is broken... at the same time that the code finally decided running well 😅😅
After the printing
inès • 06/07/2018 at 10:02 • 0 comments

After three hours of printing, here is the finishes box (there's still the plastic tours that we have to remove) :
Let's Go
Sofiane • 06/07/2018 at 09:45 • 0 comments
Reference bracelet
Sofiane • 06/06/2018 at 17:58 • 0 comments

Bracelet on which we based ourselves to design our own model !
The box
inès • 05/31/2018 at 20:08 • 0 comments

Sofiane and I spent several days to design the bracelet which will used to support our card, on the site Tinkercard. We had to take all the measures first, and then start to create the box.

We formed the box so that there is a hole to put a fabric strap, and a second hole to pass a cable that will reach the button on the movuino inside of the box.

That is a screen of the box and its lid when we designed it on the site :

On the lid, we wrote the name Simillitude which corresponds to the name of our project.