New feature planned: Time Lapse

A project log for Turn a cigarette lighter into an IR Nikon remote

Take a cigarette lighter, an AVR microcontroller (ATtiny13), and an IR LED. Wire all together. Now, you can remotely control your Nikon camera.

RoGeorge • 06/14/2015 at 00:42•2 Comments

I need to figure out a way to program the interval for the Time Lapse without additional buttons.

3D Printing AVR Arduino Art Audio Automation BeagleBone Bluetooth Cameras Clock Drones Environment Hardware IoT LED Medical Music Radio Raspberry Pi Remote Control Robotics Rockets Satellites Science Security Software Virtual Reality Wearables

Next log

The only button

06/26/2015 at 22:44 • 0 comments

Discussions

sbi.gaijin wrote 07/03/2015 at 00:30

Cigarette lighters with LEDs inside? That's a new one on me. What's the original reason for the LED?

Anyway, back to the button... time held closed. Then you need some user feedback, so shoehorn in an SMD blue led. Hold the button closed for a brief press. LED one flash, normal mode (or perhaps no flash, as this is instant-trigger mode).

Hold it closed for two seconds. LED two flashes. Ten second T/L delay.

Hold it closed for four seconds. LED flashes three times. One minute delay.

etc, etc, etc...

Are you sure? yes | no

RoGeorge wrote 09/19/2015 at 08:24

They put the LED so the lighter is also a small flashlight.

In the next version, I'll try to implement something like you said, thanks!

Are you sure? yes | no

New feature planned: Time Lapse

The only button

Discussions

Become a Hackaday.io Member