some final details, like part names, silkscreen errors and something like this took some time.

finally there was just a question about what text put in the pcb, and which names, after all of this you can see wich was the final result

so, let me give you a tour of the Badge

so it has 

• 6x6 led matrix
• 11 IO pin  available
• 2 IR led (connected at the same pin, with a jumper)
• 2 user buttons
• 1 reset button
• ISP connector
• ON/OFF switch
• magnetic sensor
• and battery socket

for the IR LEDs i decided to use one of the available I/O pins and connect it with a jumper, so if in any case, anyone wants to deactivate this function, all that is needed is an Exacto knife.