gregHere are details on the connector pinouts:
Micro USB
| 1 | VBUS | +5V |
| 2 | PA24 | D+ |
| 3 | PA25 | D- |
| 4 | nc | ID |
| 5 | GND | GND |
PMOD
| SSEL | PA09 | 1 | 1 | PA19 | RX |
| MOSI | PA08 | 2 | 2 | PA18 | TX |
| MISO | PA10 | 3 | 3 | PA17 | SCL |
| SCK | PA11 | 4 | 4 | PA16 | SDA |
| GND | GND | 5 | 5 | GND | GND |
| +3.3V | VTGT | 6 | 6 | VTGT | +3.3V |
UEXT
| +3.3V | VTGT | 1 | 2 | GND | GND |
| TXD | PA18 | 3 | 4 | PA19 | RXD |
| CDONE | PA17 | 5 | 6 | PA16 | CRESET |
| SDI | PA10 | 7 | 8 | PA08 | SDO |
| SCK | PA11 | 9 | 10 | PA09 | SS_B |
Qwiic
| 1 | GND | GND |
| 2 | VCC | +3.3V |
| 3 | PA22 | SDA |
| 4 | PA23 | SCL |
MAXDAP
| +3.3V | VTGT | 1 | 2 | PA31 | SWD |
| GND | GND | 3 | 4 | PA30 | SWC |
| GND | GND | 5 | 6 | PA14 | DBG-TX |
| nc | nc | 7 | 8 | PA15 | DBG-RX |
| ID | nc | 9 | 10 | RESET# | Reset |
GPIO
| 1 | VCC | +3.3V |
| 2 | GND | GND |
| 3 | PA02 | AIN0/AOUT |
| 4 | PA03 | AIN1/VREF |
| 5 | PA04 | AIN4/VREF |
| 6 | PA05 | AIN5 |
| 7 | PA06 | AIN6 |
| 8 | PA07 | AIN7 |
Discussions
Become a Hackaday.io Member
Create an account to leave a comment. Already have an account? Log In.