ADC Board and/or Power Supply Issues Drum Scanner

Description

I have what I think is an issue with the motor drive or PCB Mains for a drum scanner. Unfortunately it won't spin the drum and when I tested the voltage it says it's underpowered 117V instead of 220-240 to run it, but even when I use a transformer and it says 223V - it still says underpowered. There is also a PLL error I get when I run the PC diagnostics test. I would try swapping the ADC boards or power supply board but these are unobtainum. All manuals are below in the files section.

A link to the error on the Eurotherm Drive can be seen here showing it's undervoltage. https://photos.app.goo.gl/aUEZEanFkpzHbpR86A

A link to a teardown of a similar (but older model) machine can be seen here: https://www.youtube.com/watch?v=jM4_x7HReNM

Files

ICG adc.pdf Service Manual for ADC board Adobe Portable Document Format - 8.08 MB - 08/26/2018 at 20:35		Preview

icg mains .pdf Machine controller PCB - Power Supply - Service Manual Adobe Portable Document Format - 25.98 MB - 08/26/2018 at 20:35		Preview

icg drive 2.pdf Mechanical Drive System Service Manual Adobe Portable Document Format - 7.68 MB - 08/26/2018 at 20:35		Preview

icg debug test.pdf Debug Test Service Manual Adobe Portable Document Format - 7.40 MB - 08/26/2018 at 20:34		Preview

icg drive.pdf Motor assembly Service Manual Adobe Portable Document Format - 11.84 MB - 08/26/2018 at 20:34		Preview

View all 8 files

ADC Board and/or Power Supply Issues Drum Scanner

Become a Hackaday.io member

Just one more thing

Description

Files

ICG adc.pdf

icg mains .pdf

icg drive 2.pdf

icg debug test.pdf

icg drive.pdf

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member