Close
0%
0%

CNC Mini Lathe

3D Printable and Laser Cut CNC Mini-Lathe

daveDave
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
609 views
2 comments
2 followers
View Gallery
The aim is to design a CNC mini lathe which can be constructed from 3D printed parts, parts cut on a 300x500mm CO2 laser, and off the shelf drive components. One could technically buy a cheap 3D printer with 8mm linear rails then use it to print a lathe frame. Then convert the 3D printer to a lathe. My end goal is to be able to lathe magic wands. And probably lots of other stuff.

Enjoy this project?

Share

Discussions

Dave wrote 03/13/2019 at 02:58 • point

I guess I should note that I have 3D printed and assembled most of the structures in the images plus a working 3 jaw chuck from Thingiverse.  The toolpost is the primary major component to be finished. Much work has been done on the toolpost design but no physical parts have been made.

  Are you sure? yes | no

Dave wrote 03/13/2019 at 02:55 • point

Pardon the lack of progress.  My health has limited by ability to work on this. However, progress was made. Once I am feeling a bit better I will upload some more photos.

  Are you sure? yes | no

Similar Projects

PLA Plate is to recycle 3D print waste and used plastic parts into a 1/8in PLA plate for laser cutting
Project Owner Contributor

PLA Plate -Recycled Failed 3D Prints-

yusuke-tanakaYusuke Tanaka

3D printed universal wine bottle engraving machine also vinil cutter or plotter
Project Owner Contributor

CNC wine bottle engraver, plotter and cutter

blueflowerBlueFlower

RayvenOne is a SLS 3D printer for the desktop.
Project Owner Contributor

RayvenOne

mx3designsmx3designs

Low cost 3D printer that uses drawer runners for linear bearings with no laser cut or 3D printed parts. Large print volume and good quality
Project Owner Contributor

Low cost 3D printer that uses drawer runners

jonathan-irwinJonathan Irwin

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "CNC Mini Lathe", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.