Build Instructions

Collapse

• 1

  Parts

  To make this you will need an ESP8266 board and you can also add a battery if you want.

  I suggest to use a NodeMCU style board, I used Firebeetle board from DFRobot as it has onboard battery charging and monitoring solution.

  Find the battery here.

  I would also recommend using a PCB to make the project so that adding battery/OLED display/switch/esp8266 doesnt remain difficult. You can order your PCBs from PCBWAY as they offer 10 PCBs for just 5$. Check out their online Gerber viewer function.

• 2

  Download and setup the Arduino IDE

  Download the Arduino IDE from here

  1. Install the Arduino IDE and open it.

  2. Go to File > Preferences

  3. Add http://arduino.esp8266.com/stable/package_esp8266com_index.json to the Additional Boards Manager URLs.

  4. Go to Tools > Board > Boards Manager

  5. Search for esp8266 and then install the board.

  6. Restart the IDE.

• 3

  Coding the module

  1. Download the repository(Release Version 1.5): https://github.com/akarsh98/esp8266_deauther

  2. Extract the downloaded folder and navigate to the following path to open the the file in Arduino IDE. esp8266_deauther-master/esp8266_deauther/esp8266_deauther.ino

  3. Navigate to Tools > Board. Select the appropriate board that you are using NodeMCU(12E) works in most of the cases.

  5. Select the correct comm. port by going to Tools > Port.

  6. Hit the upload button.

  7. When the tab says Done Uploading you are ready to use the device.

  After uploading open the serial monitor to view the following details

View all 5 instructions