ottoragamThis
machine uses a pair of Arduino based GRBL controllers with V1.1
firmware for both the Cartesian table and vacuum head. Only the
controller parameters will be presented in this log. Instructions
on how to program GRBL parameters are available on the web.
Parameters
|
Table |
Head |
Table |
Head |
|---|---|---|---|
|
$0=10 |
$0=10 |
$26=250 |
$26=250 |
|
$1=50 |
$1=255 |
$27=1.000 |
$27=1.000 |
|
$2=0 |
$2=0 |
$30=1000 |
$30=1000 |
|
$3=0 |
$3=1 |
$31=0 |
$31=0 |
|
$4=0 |
$4=0 |
$32=0 |
$32=0 |
|
$5=1 |
$5=1 |
$100=50.000 |
$100=50.000 |
|
$6=0 |
$6=0 |
$101=50.000 |
$101=50.000 |
|
$10=1 |
$10=1 |
$102=50.000 |
$102=4.444 |
|
$11=0.010 |
$11=0.010 |
$110=20000.000 |
$110=18000.000 |
|
$12=0.002 |
$12=0.002 |
$111=20000.000 |
$111=18000.000 |
|
$13=0 |
$13=0 |
$112=20000.000 |
$112=18000.000 |
|
$20=1 |
$20=0 |
$120=1000.000 |
$120=1000.000 |
|
$21=0 |
$21=0 |
$121=1000.000 |
$121=1000.000 |
|
$22=1 |
$22=1 |
$122=1000.000 |
$122=1000.000 |
|
$23=7 |
$23=0 |
$130=310.000 |
$130=23.000 |
|
$24=25.000 |
$24=25.000 |
$131=310.000 |
$131=23.000 |
|
$25=1000.000 |
$25=1000.000 |
$132=310.000 |
$132=360.000 |
Discussions
Become a Hackaday.io Member
Create an account to leave a comment. Already have an account? Log In.
Link to the parameter programming info?
Are you sure? yes | no