DIY UV Light Box Controller For SLA 3D Prints

Description

Make your own budget UV light box with built in adjustable timer and intensity. Easy to use UI displayed on cheap commonly available OLED screens (compatible with ssd1306, ssd1309 and sh1106) with three button interface and piezo speaker alarm.

Special Thanks to JLCPCB for providing pcbs to get the ball rolling on this project. JLCPCB Prototype for $2 (Any Color): https://jlcpcb.com

Check out the assembly and demo video here: https://www.youtube.com/watch?v=IiPcLKra-b4

Files

UV Lightbox BOM.txt Bill of Materials plain - 9.49 kB - 03/10/2020 at 12:11		Download
UV_Lightbox.ino.hex ATMEGA328P Precompiled Hex hex - 48.92 kB - 03/09/2020 at 17:12		Download
UV_Lightbox.ino.with_bootloader.hex ATMEGA328P Precompiled HEX with Bootloader hex - 53.10 kB - 03/09/2020 at 17:12		Download
UV_Lightbox.ino ATMEGA328P Arduino Sketch ino - 24.22 kB - 03/09/2020 at 17:09		Download
UV Lightbox_2020-01-28.zip PCB Gerber Files x-zip-compressed - 239.05 kB - 03/09/2020 at 17:08		Download

View all 7 files

DIY UV Light Box Controller For SLA 3D Prints

Become a Hackaday.io member

Just one more thing

Description

Files

UV Lightbox BOM.txt

UV_Lightbox.ino.hex

UV_Lightbox.ino.with_bootloader.hex

UV_Lightbox.ino

UV Lightbox_2020-01-28.zip

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member