Components links

A project log for Backplane for DIY NAS

Sata backplane design to go in my DIY NAS case

GOODWIN • 03/23/2020 at 10:47•0 Comments

Components I used :

SATA Power : http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575538716&toolid=10001&campid=5338666514&customid=&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F10Pcs-New-Sata-15-Pin-DIP-Type-Straight-Male-Connector-For-Hard-Drive-HDD%2F303311913023%3F_trkparms%3Daid%253D1110001%2526algo%253DSPLICE.SIM%2526ao%253D1%2526asc%253D225073%2526meid%253D393bd5b0cc554fad946335ed796b856b%2526pid%253D100036%2526rk%253D3%2526rkt%253D12%2526sd%253D303311911942%2526itm%253D303311913023%2526pmt%253D0%2526noa%253D1%2526pg%253D2047675%26_trksid%3Dp2047675.c100036.m2109

SATA header :

SATA data :

Discussions