Doodle Doggy Badge Kit

Learn to solder surface mount components with a puppy shaped printed circuit board. Features two 1206 SMD blue LED’s and 1 Ohm resistors.

Become a Hackaday.io member

To make the experience fit your profile, pick a username and tell us what interests you.

Public Chat

Similar projects worth following

Push button blink badge. Great for kids and entry level makers.

Start soldering surface mount components with just six pieces.

Demo of Doodle Dog Badge

MPEG-4 Video - 6.48 MB - 04/10/2020 at 02:27

1 × Mini push button B3U-1000P tact 2.5mm x 3mm
2 × 1206 SMD 1 Ohm resistor 3216 metric. Surface mount.
2 × 1206 SMD Light emitting diodes Bright blue 3216 metric LED’s
1 × Coin cell battery holder CR2032 surface mount battery holder
1 × Doggy Shaped PCB One white puppy shaped printed circuit board. Can be colored, and used for surface mount solder practice.

1

Solder LED & Push Button

Push button is non polarized.
2

Solder Resistor SMD & Battery holder

Resistors are non polarized. Coin cell battery holder is soldered with ground toward the bottom of the board.
3

Step 3