BattLab-One - Battery Optimization Hardware

Description

The Battlab-One:
- Replaces the battery for your IOT project by providing a power supply unit with standard battery voltage output and then uses the built-in
current sense technology of the Battlab-One to capture the current consumption profile of your device
- Captures both active event and sleep mode current
- MSP430 device simulates standard batteries for Li-Ion, LiFePO4, Alkaline, NiMh, NiCd
- Provides voltages of 1.2V, 1.5V, 2.4V, 3.0V, 3.2, 3.6V, 3.7V, 4.5V at up to 450 mA , perfect for measuring your ESP8266 power demands.
- Enables trigger input to capture different firmware states and their impact on overall battery life
- Long active event capture duration from seconds to hours
- Extremely low burden voltage across all ranges (BattLab-One provides PSU output)
- Offers what-if optimization analysis to improve the design of your project/product
- USB power and data isolated from PSU output to avoid ground loops
- Open source hardware and software

Files