mutantC v3 Featuers

• Able to go Sleep and wake up from it using ckicling any button.
• Add RTC. [Done and Working]
• Add gyro support using MPU6050 module.
• Add presure, temp and humidity support usin BME280 module.
• Able to turn of the BME280 and MPU6050 using keyboard button.
• Full poweroff using OS and keyboard key. [Done and Working]
• Make a preinstalled display driver OS image.
• Added a docking port beside pi USB ports. [Done and Working]
• Ablitiy to turn off display, expansion port. [Done and Working]
• Added a buzzer. [Done and Working]
• Position the ardinuo close to Pi ports so there is space to fit a bigger hit sink. [Done and Working]
• Design the 3D parts to reduce supports. [Done and Working]
• Add dock port with I2C, UART, some GPIO.
• Able to read battery voltage using pro micro. [Done and Working]
• LED's connected to pro micro has PWM support. [Done and Working]
• Move the stema/Qt I2c connector bottom so it is acessible from outside. [Done and Working]
• If you have any thing else you want to see open an issue from left side
• Add a track point to have mouse support with 2 buttons in side using seaparated PCB.