Project Logs

Collapse

• Workshop Chat Transcript

  Lutetium • 11/07/2020 at 23:56 • 0 comments

  14:07:34     From Jonathan Foote : Hello everyone!  This is Jon the workshop facilitator. Most of the workshop will be using VCV rack. Download here (free and open source): https://vcvrack.com/Rack  

  I have a very few illustrative slides, here they are: https://docs.google.com/presentation/d/1y1ii-zUf8o0NmJ6JhWnxGxKJvqzZDOQeEZ70nTMt6zE/edit?usp=sharing

  Hello everyone!  This is Jon the workshop facilitator. Most of the workshop will be using VCV rack. Download here (free and open source): https://vcvrack.com/Rack  

  I have a very few illustrative slides, here they are: https://docs.google.com/presentation/d/1y1ii-zUf8o0NmJ6JhWnxGxKJvqzZDOQeEZ70nTMt6zE/edit?usp=sharing

   
  14:08:25     From Jonathan Foote : If you are looking for the VCV rack workshop, you are in the right place!
  14:11:01     From Alexandre Guimaraes To Dan Maloney(Privately) : Hi Dan. I am supposed to moderate, but by what I saw on my last talks there is not much to de done ! Let me know what you need from me.
  14:11:23     From Dan Maloney To Alexandre Guimaraes(Privately) : OK, you bet. Thanks!
  14:12:39     From Alexandre Guimaraes : They are planning to release sometime in the future… Depending on the material.
  14:14:17     From FireHawk : what if the audio output says "no device"?
  14:16:38     From Jaron Ali : hello
  14:17:28     From Dan Maloney : Hi all -- please use this Zoom chat to ask questios rather than the Hackaday.io chat - thanks!
  14:18:15     From LqqkOut & Ozma : please re-paste anything important from early in the chat for newcomers
  14:18:49     From Ben : From earlier: "Hello everyone!  This is Jon the workshop facilitator. Most of the workshop will be using VCV rack. Download here (free and open source): https://vcvrack.com/Rack  

  I have a very few illustrative slides, here they are: https://docs.google.com/presentation/d/1y1ii-zUf8o0NmJ6JhWnxGxKJvqzZDOQeEZ70nTMt6zE/edit?usp=sharing
  "
  14:19:14     From FireHawk : If you get "no device" in the audio output, clicking WASAPI then selecting the correct device in the 2nd line fixed it for me (Thanks Ben)
  14:19:39     From LqqkOut & Ozma : Confirmed, audio works!
  14:21:53     From LqqkOut & Ozma : @Ben thanks for the paste
  14:21:57     From Dan Maloney : Sorry if I leave you in the aiting room for a bit -- there appears to be no way to auto-admit newcomers
  14:23:46     From Dan Maloney : This is from the top of the chat, in case you missed it:
  14:23:48     From Dan Maloney : Hello everyone! This is Jon the workshop facilitator. Most of the workshop will be using VCV rack. Download here (free and open source): https://vcvrack.com/Rack I have a very few illustrative slides, here they are: https://docs.google.com/presentation/d/1y1ii-zUf8o0NmJ6JhWnxGxKJvqzZDOQeEZ70nTMt6zE/edit?usp=sharing Hello everyone! This is Jon the workshop facilitator. Most of the workshop will be using VCV rack. Download here (free and open source): https://vcvrack.com/Rack I have a very few illustrative slides, here they are: https://docs.google.com/presentation/d/1y1ii-zUf8o0NmJ6JhWnxGxKJvqzZDOQeEZ70nTMt6zE/edit?usp=sharing If you are looking for the VCV rack workshop, you are in the right place! 14:24:49     From LqqkOut & Ozma To Dan Maloney(Privately) : you can turn off the waiting room altogether and folks will auto-enter
  14:26:06     From Dan Maloney To LqqkOut & Ozma(Privately) : OK, thanks! Like I said, Zoom rookie here. Thanks for the tip!
  14:26:41     From LqqkOut & Ozma To Dan Maloney(Privately) : no problem, I only know because I have to help my kid with school stuff ;)
  14:31:25     From Paul : I had to turn up the FM CV knob on the VCO-1 to make the change appreciable.
  14:31:38     From Ben...

  Read more »

View project log