Tested Firmware Version

• TEXAS INSTRUMENTS bq40z50
• ATMEL ATmega32HVB

Battery controller probing requests. 0x0A=Atmel, 0x16=TI

Actual Current is signed.

Power management for the LC-Display.

Display will be scrolled (11 digits).

HRD can be connected to external devices like personal computers to transfer and store the extracted technical data.

https://github.com/peterloes/HRD/blob/master/Getting_Started_Tutorial/1_poster_overview.pdf

The standalone HRD features EFM32 ...the world´s most energy friendly microcontrollers

ARM Cortex-M3 EFM32G230F128

Code Snippets

Make quick changes to the Source Code.

https://github.com/peterloes/HRD/blob/master/Software/main.c

   /*! List of items which can be displayed
     *
     * This array contains a list of items that can be displayed on the LCD.
     * Element 0 is a special case, it shows the name, version, and date of
     * the firmware image.  Usually up/down push buttons are used to select
     * the item to be displayed.
     *
     * The order of these items may be rearranged by the user.  Single or
     * groups of entries can be de-activated by commenting them out.
     */

static const ITEM l_Item[] =
{  // [1234567890123456]    Cmd                Frmt
    { ">>> HRDevice <<<",   SBS_NONE,            FRMT_FW_VERSION    },
    { "Battery at SMBus",   SBS_NONE,            FRMT_BAT_CTRL    },
    { "Supply Battery",     SBS_NONE,            FRMT_CR2032_BAT    },
    { "Manufacturer",       SBS_ManufacturerName,    FRMT_STRING    },
    { "Device Name",        SBS_DeviceName,        FRMT_STRING    },
    { "Device Type",        SBS_DeviceChemistry,    FRMT_STRING    },
    { "Serial Number",      SBS_SerialNumber,        FRMT_HEX    },
    { "Production Date",    SBS_ManufactureDate,    FRMT_DATE    },

https://github.com/peterloes/HRD/blob/master/Software/drivers/BatteryMon.c

    /*!@brief Probe List of supported Battery Controllers */
 

  static const BC_INFO l_ProbeList[] =
   {  //  addr    type        name (maximum 10 characters!)
   {  0x0A,    BCT_ATMEL,    "ATMEL"        },
   {  0x16,    BCT_TI,        "TI bq40z50",    },
   {  0x00,    BCT_UNKNOWN,    ""        }    // End of the list
   };

/*!@brief SBS Commands
 *
 * These are the defines for the registers of the battery controller.  Each
 * define contains the following bit fields:
 * - Bit 17:15 specify the controller type where the define belongs to.  Bit 16
 *   (0x10000) represents the Atmel controller, while bit 17 (0x20000) specifies
 *   the TI controller. If both bits are set (0x30000), the register exists in
 *  ...