Hi everyone,

this newest firmware version is another quality of life update that improves general usability and a lot of the behind the scenes code. Most of the changes include the following:

• Almost 10% reduction in energy consumption (this result has been tested with an SSD1306 OLED)
• Slightly better timing accuracy with Gamma MCA: a few % less standard deviation for the cps value due to more accurate scheduling.
• The geiger mode display will now show the unit "kcps" if the measured cps is higher than 1000. This helps a lot with the limited line space and should be enough for most use cases.
• Possibly better higher cps behavior (not tested yet), because the first CPU core is now entirely free to process interrupts only. No other tasks run on this core anymore.

Enjoy!