Close
0%
0%

A Smart Home Bluetooth LE Lights Controller IoT

This is an IoT project that uses nRF52840 Dongle and a smartphone to switch ON/OFF lights in a house via Bluetooth LE.

Similar projects worth following
A Smart Home Bluetooth Low Energy Lights Controller IoT project is an embedded system that uses a Nordic nRF52840 Dongle and a smartphone switch ON/OFF lights in a house. For demonstration purposes, it controls two 220VAC bulbs and three 5VDC LEDs. It is powered by a 12VDC/2A power adapter.

A Smart Home Bluetooth LE Lights Controller IoT project

cjdiasdiasdiasidasdiasdiasid

cascasjckasjcaskcaskask

How does this project work?

The Hardware

dqwdqwdkqwdokqwdokqw

casclas,casl,aslxas,lc,asasxsax

The embedded software

cascascascascascascascsac

tfhchvhghc

dsvsdmlvsdlvsd

dscsdksdkcsd

tfhchchvgchvhc

Ghvbvhhvbvbv

Ggghvhbj

The mobile App

vsdvsdlvsdvmsdv

sdvsdvksdvsdk

  • 1 × nRF52840 Dongle
  • 1 × L7805CV Power Management ICs / Linear Voltage Regulators and LDOs
  • 2 × 5mm Red LEDs
  • 1 × 5mm Yellow LED
  • 1 × 5mm Green LED

View all 13 components

  • 1
    Experimental Prototyping Board

    How to use the Experimental Prototyping Board

    fkdjasdasdk

    qdjqwdqwdqwdo

    adasdjaskcjaskcj

    qwdqwdqwdqwdqw

    srddfdfdfdftfdtfxddd

    kmkkmlklk

    lxaslxaslasas

    asckascascjasc

    askascasas

    xjsxasxasjxasiacasx

    dytfdtrdtrdtrdr

  • 2
    nRF Connect for Mobile App

    How to use the nRF Connect for Mobile App

    ascjascjasckjasckasj

    cakscasckascasc

    mnmnmlm

    dfddtuftftftrdeswyeey

    fcgfgvjhvgcgcgcvgv

    dxdfxdfxfxdfx

View all instructions

Enjoy this project?

Share

Discussions

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates