PiZero-ME-MAX

Description

The plan is to create a PCB that will allow you to place a raspberry pi zero in a ME-MAX housing so that it can be mounted on DIN rail as often used in industrial applications.
It will be designed to fit into the housing with 6 4pin conntectors.
It will also include the following circuitry.
- 24Vdc to 9Vdc converter - DC-DC, so that a CAN bus can be established on the backplane
- 9Vdc to 5Vdc converter - probably linear to drive the raspberry pi zero
- CAN transceiver for backplane (model mix)
- RS-485 transceiver for backplane (model mix)
The following external connections will be fixed:
- Serial port accessible from one of the external connectors
- 24VDC from one of the external connectors
- CAN or serial or RS-485 available from the T-BUS
- 24VDC available from the T-BUS

Files

00825556_MSTBO_2.5_4-P-R.pdf Adobe Portable Document Format - 85.03 kB - 01/02/2017 at 22:39		Preview

00613164_MSTBO_2.5_4-P-L.pdf Adobe Portable Document Format - 84.85 kB - 01/02/2017 at 22:39		Preview

2200326.pdf Adobe Portable Document Format - 96.99 kB - 01/02/2017 at 22:33		Preview

2200325.pdf Adobe Portable Document Format - 96.87 kB - 01/02/2017 at 22:33		Preview

MP1584EN data sheet.pdf Data sheet for DC-DC converter Adobe Portable Document Format - 387.24 kB - 12/31/2016 at 14:33		Preview

PiZero-ME-MAX

Become a Hackaday.io member

Just one more thing

Description

Files

00825556_MSTBO_2.5_4-P-R.pdf

00613164_MSTBO_2.5_4-P-L.pdf

2200326.pdf

2200325.pdf

MP1584EN data sheet.pdf

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member