Close
0%
0%

Hexadecimal 4×4 Matrix Keypad

A Hexadecimal KeyPad design journey. Ideal for early Retro Computing and 8-bit Microprocessor based projects.

digicool-thingsDigicool Things
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
210 views
0 comments
1 followers
View Gallery
This project was initiated when I dug out of storage, my first “video” computer that I’d built way back around 1979.

It was the DREAM 6800 computer, which was designed by Michael Bauer, and published in Electronics Australia magazine in 1979.

The DREAM 6800 was a Motorola 6800 based computer board, featuring 1KB of ROM, 1KB or RAM, and a 64×32 pixel B/W video display output.

The DREAM 6800 was controlled with a Hexadecimal Keypad, which was a quite common input device with early low cost single board microcomputers in the late 70’s.

When I searched online, I found that Hexadecimal Keypads are now almost impossible to buy. That is, real mechanical hexadecimal keypads!

There are cheap “Membrane Switch” keypads available, but that’s not something I’d enjoy using.

So, this got me on the path of designing my own Hex Keypad, intended for use in some early retro-computing projects.

First, I designed a budget Hexadecimal matrix Keypad, using 12x12mm Tactile push button switches, on a PCB with the keycap legends silk-screened alongside each push button switch.

I then went on to design my Ultimate Hexadecimal Keypad version, based on Cherry MX key switches (of course!).

But, finalising the best way to implement the required MX Keycaps, in a way that would satisfy my vision of the “Ultimate Hex Keypad”, is where this project originally stalled.  Until now!

But first, please join me on Part 1 of my Hexadecimal Keypad journey by viewing the video below, where I assemble the first prototype of my initial Tactile Switch based budget Hex Keypad.

  • Let's Test our Tactile Switch Hex Keypad

    Digicool Things • 09/12/2023 at 22:14 • 0 comments

    Following on from Part 1 of the Tactile Switch version of my Hex Keypad project, where I assembled my first Keypad, for Part 2 it’s now time for some testing!

    For testing, I use Arduino to implement a USB Keypad. 

    Although the intended use of the Hex Keypad is for Retro Computing projects, Arduino allows a quick, easy and visible testing method for the 4×4 Matrix Keypad’s operation.

    So, please join me on this Part 2 of my Hexadecimal Keypad journey, where I first demonstrate my original 70’s Hex Keypad operation with a simple Arduino sketch, and then use the same sketch to test my new Tactile Switch version Hexadecimal Keypad.

View project log

Enjoy this project?

Share

Discussions

Similar Projects

The FABI allows control of a computer’s mouse cursor and typing desired keyboard keys by using buttons
Project Owner Contributor

FABI - Flexible Assistive Button Interface

benjaminaignerbenjaminaigner

Toolkit for diy devices that allow the use of touchscreens to people with neuromuscular coordination problems
Project Owner Contributor

K-Ability Toolkit

dariocosedariocose

Raspberry Pi Zero W 2 Arm mounted Cyberdeck with a Chorded Keyboard
Project Owner Contributor

ComputeDeck-B3

atltvheadatltvhead

A compact, handheld ortholinear keyboard with tactile switches. Hardware customizable and fully programmable with QMK firmware.
Project Owner Contributor

FiNCH: Thumb Keyboard

alexAlex

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "Hexadecimal 4×4 Matrix Keypad", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.