Close
0%
0%

PixelTime - a MicroPython-Powered watch

a low power led watch based on ESP32-C3 & MicroPython

Similar projects worth following
I liked some of the electronic watches of my early years and wanted to DIY one myself

No need for complicated functions, make a pure timing tool

Ultra-long standby, 5S no operation automatically enters standby mode

Use WiFi to automatically calibrate the time, which is convenient for updating the time, esp32-c3

Support MicroPython programming to facilitate code updates

The thickness is only 8.3mm, and the 302530 lithium battery is used 200mAh

4P magnetic charging, 20mm strap

Enjoy this project?

Share

Discussions

powiadam.ci wrote 09/25/2023 at 09:23 point

1. please add mechanical switch off for wifi (more power)

2. please add bigest screen for example 2" and 128x64 minimum

3. Please add more keys, meybe 8-16

How long this device work? You are check this in real situation? A month or more?

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates