Build Instructions

Collapse

• 1

  Join the network

  This is made very simple, no registration simply a string is required.
  

  https://github.com/invpe/gridshell/blob/main/Documentation/Tutorials/Use.md
  

• 2

  Upload vanilla firmware and configure your node(s)

  Do it via the Web pages as provided in the documentation.
  

  https://github.com/invpe/GridShell/blob/main/Documentation/Tutorials/Release.md
  

• 3

  Start building, start using, have fun!

  The project follows the industry standard pattern to executing tasks with input data:

  task_id = submit("script","input payload")
  results = gettask(task_id)

  Submit your script to the network with the PHP script:
  

  php use.php YOUR_USER_HASH "OUTPUTPAYLOAD=\"HELLO\"" "SOME_INPUT_PAYLOAD"

   Submit your script from your Arduino Sketch:

  #include <WiFi.h>
  #include "CGridShell.h"
  uint64_t uiLastTaskSubmitted = 0;
  uint32_t uiLastTaskID = 0;
  void setup() {
    CGridShell::GetInstance().Init("Your Grid Hash Goes here", false);
    WiFi.begin("YOUR_INTERNET", "YOUR_PASSWORD");
    while (WiFi.status() != WL_CONNECTED) { delay(1000); }
  }
  
  void loop() {
    CGridShell::GetInstance().Tick();
    if (millis() - uiLastTaskSubmitted >= 60000) {
      uiLastTaskID = CGridShell::GetInstance().AddTask("OUTPUTPAYLOAD=\"Hello From \"+INPUTPAYLOAD", "GridShell");
      uiLastTaskSubmitted = millis();
    }
  }

View all 4 instructions