Close

Integration of the ESC on an UNO board

A project log for Autonomous 1/28 micro car from scratch

A micro fast autonomous car

prototyxPrototyx 01/10/2024 at 08:440 Comments

Integration of the ESC and a telemetry module on an UNO board :

This board will have the following characteristics :

- 1 Atmega328P for the Uno Board (Top Face) --> It will send the instruction to the Servo and ESC , will communicate with several sensors and a Raspberry Pi

- 1 Atmega328P for controling the motor (throttle, brake) (bottom Face)

- 1 2.4Ghz telemetry module (CC2500 + PA / LNA) that I made in a previous project (bottom Face)

Top Face :

Bottom Face :

Discussions