Project Logs

Collapse

• Catalogue page

  Keith • 05/12/2024 at 23:24 • 0 comments

  VCON
  VMEbus System Controller and Terminator

  The VCON is a low-cost multi-function system controller with passive terminators. It fits on the rear of the backplane in the slot 1 position. It produces system clock and power-on reset, with an optional input for a reset switch.

  There is a single-level arbiter with a 16, 32, or 64 microsecond time-out, a bus time-out of 16, 32 or 64 microseconds and an IACK daisy-chain driver. In addition, the VCON contains a passive termination network.

  Features:

  • VMEbus utility signal
  • Arbiter
  • Bus time-out
  • Bus termination

  Ordering Information:

  VCON VMEbus System Controller and Terminator

View project log