The resources I found at the beginning

A project log for 144MHz APRS iGate with RPI Zero+RTL2832+SA818V

I'm experimenting this cheap solution as a second attempt after trying ESP32 and SA818

Guido • 06/24/2024 at 19:37•0 Comments

Sources

I collected two initial hardware resources using ESP32 and SA818: https://oshwlab.com/APRSTH/esp32sa818#P6 https://github.com/nakhonthai/ESP32IGate/blob/master/doc/ESP32DR_Simple_Schematic.pdf

and two software: https://github.com/erstec/APRS-ESP https://github.com/nakhonthai/ESP32IGate

and I'm now trying to receive some RF APRS messages on 144.8 MHz to test rx capabilities.

Next log

First steps (SA818v Transceiver)

06/24/2024 at 19:44 • 0 comments

Discussions