• Log 3 - 11/03/2025

    theo.ducarne • a day ago • 0 comments

    - Today, we started a first version with a model to see if the dimensions were possible (can the engines fit, easy access).

    - We also looked at whether the boat could float easily or not and how we will assemble the wood.

    - We tested the different engines and decided on the location of each component (see photo).

  • Log 2 - 04/03/2025

    theo.ducarne • 03/04/2025 at 09:51 • 0 comments

    - We found the dimensions of our boat (length 35 cm, width 12 cm and height 8 cm, enough to accommodate the various mechanisms).

    - Choice of materials (mainly wood), use of waterproofing for flotation. The glass will be plastic. 

    - We decided to use two motors (one to move the boat forward and backward, and one to turn the rudder). 

    - Start of the sketch (see photo)

    - Finish the sketches with the bottom and side views for the next session

  • Log 1 - 25/02/2025

    theo.ducarne • 03/04/2025 at 08:31 • 0 comments

    - We looked for various projects, and some interested us, like the car, or a crane.

    - However, we finally settled on a motorboat project. So we began researching the feasibility and various features of the project. 


    - Next time, we'll have to detail the boat for project feasibility and make a sketch.