8-Command Radio Control (10m)

Description

This project delivers a complete 315MHz wireless radio control system, featuring both transmitter and receiver units for 8-command execution up to 10 meters. The transmitter uses a PIC16F76 microcontroller and an HT12E encoder to serialize commands, broadcasting via an H34C-315M module. On the receiving end, a SYN840R module captures the RF signal, while an HT12D decoder and a second PIC16F76 process the data. This robust hardware pair ensures noise-immune, reliable remote control for automation.

Files

radio_control.jpg Receiver and transmitter circuit JPEG Image - 648.51 kB - 06/18/2026 at 19:53		Preview

transmitter.hex Transmitter firmware for the PIC16F76 microcontroller hex - 685.00 bytes - 06/18/2026 at 19:53		Download
receiver.hex Receiver firmware for the PIC16F76 microcontroller hex - 1.40 kB - 06/18/2026 at 19:53		Download

Components

2 × Pic16f76 Microprocessors, Microcontrollers, DSPs / ARM, RISC-Based Microcontrollers
1 × H34C-315M RF module
1 × SYN840R RF module
1 × HT12D Electronic Components / Misc. Electronic Components
1 × HT12E Electronic Components / Misc. Electronic Components

View all 8 components

8-Command Radio Control (10m)

Become a Hackaday.io member

Just one more thing

Description

Files

radio_control.jpg

transmitter.hex

receiver.hex

Components

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member