Boards in and tested!

A project log for 1.5" SSD1351 OLED Breakout

This is a breakout board for a 1.5" color OLED with an SSD1351 driver. All of the pins are broken out for ease of prototyping.

Jon Thomasson • 01/31/2018 at 16:00•0 Comments

Got the boards back from oshpark about a month ago, but had a chance recently to assemble. After tying BS0 and BS1 to ground to enable SPI, I tested the OLED with the adafruit SSD1351 driver library: here. Here's the result:

And here's a look at the back:

Boards in and tested!

Discussions

Become a Hackaday.io Member