Wrote a I2C library for ESP32. Got it to display on the SSD1306 OLED.
Already have an account? Log in.
To make the experience fit your profile, pick a username and tell us what interests you.
Started working on ESP32. Noticed there was no ESP32 SSD1306 OLED Display Library. So I threw one together in my free time over two days.
It is still rough around the edges, needs refinement but I just wanted to put it out there for someone in case they needed it.
Cleaned up the code and added i2c address calls to the i2c library to access more than one device on the i2c bus.
Also just started dabbling with ESP32 and realised no OLED lib, so thanks for this! Will be a few weeks before I get round to the OLED stuff (focus on sensors at the moment) but I'll contribute if I spot any issues.
Thanks. If the sensors are I2C you can use the xi2c files on the github page to easily interface with them.
To be completely fair there is one or two oled library but it is c++ arduino ide styled library. This is pure C.
akbarhash
Pop Gheorghe
HX2003
kmatch98
Makerfabs
Works flawlessly, even when there's another device on second I2C.