Retrotube - All in 1 DIY Raspberry Pi Case

A decorative, retro, customizable all in one Raspberry Pi case with 8 inch 4:3 screen, stereo sound, volume knob and hard power switch

Dan

Following Follow project

Liked Like project

Become a Hackaday.io member

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Similar projects worth following

3.1k views

1 comments

479 followers

12 likes

View Gallery

Description

The final version featuring new trim pieces, red mahogany finish, power button, gold engraving, refined back panel.

Need a 4:3 screen to play your favorite old games or movies on but can't find one or just don't have the space? Miss that authentic analog sound? Introducing Retrotube a compact all in one Raspberry pi case styled after a vintage TV. Good for more than just games. Add some living room swag to the office for all your Pi projects requiring a dedicated screen and speakers in limited space. Made from 1/8 inch Baltic birch laser cut/engraved plywood with a classic shellac finish. Measures approx. 10.75" H, 6.75" W, 4.5" D without legs.

Retrotube features:
Eight inch 4:3 screen and two 3w speakers
Convenient smart power switch and volume knob
Headphone jack
LED status indicator
Removable case legs
Carrying handle on back that gives access to screen controls

Requires a 5V 2.1mm center positive, 4A minimum, regulated power supply

DXF fil

Details

Retrotube is a all in one Raspberry Pi case made from attractive 1/8" Baltic birch laser cut/engraved plywood panels. It features a 8" LCD panel, 3w x 2 class D audio amp w/ volume knob & 2 x 3w speakers, hard power switch, micro SD to SD extension, removable legs. The Pi's USB and Ethernet ports are accessible from the back along with the SD card. I was raising funds on Kickstarter to make this project available as a kit, the campaign was unsuccessful. I carried on, made several revisions and now have assembled units for sale in my Etsy shop.