Marlin firmware and configuration for HICTOP 3DP-11 printer
Already have an account? Log in.
To make the experience fit your profile, pick a username and tell us what interests you.
Marlin firmware and configuration for HICTOP 3DP-11 printer: download from files
Big thanks to Chip Luck for doing most of the work:
http://www.3dprintingforum.us/viewtopic.php?t=298
Tested using Arduino IDE 1.8.1, Printrun-Mac-03Feb2015, Cura 15.04.6, and Repetier-Host 1.0.2 on a mac.
https://www.arduino.cc/en/Main/Software
http://kliment.kapsi.fi/printrun/
Marlin-1.1.x.zipx-zip-compressed - 2.60 MB - 03/26/2021 at 03:33 |
|
Well, since I never got around to doing the 24V bed upgrade, and since I really wanted to get a bigger/better machine, I donated the Hictop to my local maker space, replacing an ancient wobbly reprap mendel. One of the members there, Forrest, who is awesome with 3d printers, tweaked the PSU and firmware so that the bed heats up quicker.
Update: Discovered that the bed doesn't stay within the required temperature if ambient is low or there's even a slight breeze. I'm going to upgrade the bed heater to use 24V. This involves adding a 24V PSU, a MOSFET, and rerouting some of the associated wiring. Also, on the advice of my 3D printer hacker friend Jason, I am upgrading to heavier bed springs and Z axis bearings.
So that's the plan, but don't have a schedule yet, sorry. Like everybody, I have too many other things going on that compete for time. Follow if you're interested!
Sorry for the months-late response. Never got any notification, or if I did, I must have ignored it.
Check to make sure the ribbon cables are not swapped.
I have been scouring the net looking for just this. Please, tell me, what version of Arduino should I be using to get this to compile. I downloaded your file from github and could not get it to compile on 1.0.6
Darryl.N
Michael O'Toole
Malte Schrader
Gorky
Lutetium
Display not working any ideas? Just squares.