Assembling the PCB

A project log for Bicycle Computer

A simple bicycle computer that shows speed and distance on a LCD screen. It works on LiPo batteries and uses a reed switch as sensor.

Clovis Fritzen • 04/18/2015 at 19:30•1 Comment

Hi guys!

Today is a Saturday, so it means this is the making day for me!. I recently got the SMD ATMEGA328P-AU on the mail, so the task for today is assembling and testing the pcb and code.

After an hour (or so) I have finished assembling the PCB, and managed to upload the blink_without_delay sketch to the Arduino (that leaded to the yellow led to blink!). So far so good, the board circuitry is all good, next step is uploading the actual bike_computer firmware to it and start debugging.