Build Instructions

Collapse

• 1

  Step 1

  Prepare the hardware

  Since most of the Arduino shields are usable as a stack, you need to apply less effort to setup the hardware. The final setup will be as follows.

  
  
• 2

  Step 2

  Add required additional Arduino libraries

  I have used Arduino 1.5.6-r2 version as the IDE.You can download it from this url.(http://arduino.cc/en/Main/Software). Also the required libraries can be downloaded from following links.

  1. HttpClient library
  2. DHT11 library

  All other required libraries are available as standard libraries with the IDE.

• 3

  Step 3

  Configure GadgetKeeper

  Create the "weatherStation" thing first:

  Then create the "temperature" and "humidity" properties under weatherStation as follows.
  

  
  

View all 4 instructions