Putting a high-score meter on a local work of art to create higher levels of interactivity and community involvement
Already have an account? Log in.
To make the experience fit your profile, pick a username and tell us what interests you.
The box will be well-sealed with machined screws.
I don't want this thing to be stolen, so I will be mounting it with neodymium magnets. Once they are screwed into the project case, it will be difficult enough to remove in order to discourage petty thieves from taking it.
I'm gonna want it to put itself into sleep mode most of the time in order to conserve on battery life
I'm also going to have to find a way to choose when to turn the backlight on and off at will
Hi, all!
After taking a backseat for a while, the project is up and running again! I am proud to announce I have been selected to receive a micro-grant from the arts-engine program at the University of Michigan to improve, finish, and publish the project. Very excited to get started on this again!!
Well, I definitely ran 9V through the accelerometer and blew the thing.
That's okay though, because science.
Anyways, I realize now what I really need is a gyroscope. If I can get the instantaneous angular velocity and mount it on a fixed point I can use the parallel-axis theorem to use the space diagonal of the cube in order to get an arc-length velocity in meters per second.
That was quite the mouthfull, wasn't it?
Managed to find screws for the mounting magnets and secured them diagonally on the back of the box. The soldering job took a long time and required a hearty amount of heat shrink tubing but it's up and running. It's brilliant just to look at it running all by itself, enclosed in its little box. Very cool.
Two problems:
1) The 'H' character (position[0][0] on the lcd) fades in and out sporadically
2) The high score function displays nothing but 0.00. I do not know if this is because at one point I accidentally connected 9V to my voltage divider circuit and actually blew the accelerometer, or if my code is just being odd. I'll start off with some basic tests tonight and move on from there.
Cut a hole in the project box and sealed it with silicon to keep it safe from water damage.
Still trying to figure out the correct size of screw and placement for the back magnets
I'm facing a really big challenge here: I have a working prototype with my Arduino but I know I work the device on an ATTINY 84a. It's under 8kb in total and I can use my Arduino as an ISP. However: I need to know to things:
How to code for the stupid thing
How to store a 'High Score' variable in the EEPROM
Any tips you guys might have or resources for this would really, really, really help.
Thanks!
Well, first step is to get a copy of the datasheet, it's your main reference book for everything about that chip, including how to program the EEPROM (section 5.3, on page 16). It also has lots of coding samples.: http://www.atmel.com/Images/doc8183.pdf
Second step would be to get GCC for your system, and try using it for a bit. Ladyada's tutorials are a great starting point, and they should tell you how to get set up, and get something to blink: http://www.ladyada.net/learn/avr/. If you're on Windows, it's probably easiest to use Atmel's "AVR Studio", which automatically sets up avr-gcc in a Visual Studio based environment.
You can even use avr-gcc with your full-sized arduino, which might make it a bit easier to manage. The avr libraries are pretty good at working across chips, so you might be portable over to the attiny as well (some of the peripherals will be different, so always make sure to check the datasheet).
If you've already figured all that out, you're golden. Ask questions on IRC (#avr on freenode.net). People will only be able to help you if they understand what you're having difficulty with, and have worked through a similar problem before. So, the best way to get help is to go until you get stuck, and then ask about the specific issue your having. Trying new things is how you learn and get stuff done!
Hope some of that is useful. And, cool Cube thing!
Yes this is exactly what I am looking for here. All excellent. Pointers. Also a grand idea to use avr-gcc with the arduino for more rapid prototyping and then porting it over to the smaller chip when the time is right.
I'll update when I can.
Thanks again!
Keenan Rebera
sparks.ron
AdityaPrakash23
Peter Walsh
Fabien-Chouteau
i don't think a few magnets would stop me from stealing it