Richard Hogben-
Assembly of Open NSynth
06/28/2018 at 08:46 • 0 comments![]()
Pro tip: solder the components and 40 pin header on the correct side of the board... :(
![]()
OLED display
![]()
Midi out
![]()
Raspberry Pi
![]()
Testing
![]()
All three finished
![]()
Demo coming soon!
-
Open NSynth Enclosure and Knobs
06/28/2018 at 08:36 • 0 comments![]()
Laser enclosures
![]()
Acrylic with matte finish on one side
![]()
Formlabs warming up the NSynth files
![]()
Supports!
![]()
Drying after the bath
-
NSynth Components Arriving
06/10/2018 at 16:12 • 0 commentsOrders from Mouser, Digikey and Newark are making there way in.
![]()
Next up, print the knobs and cut the enclosures. -
Robotspeak Modular Show
04/22/2018 at 00:53 • 0 commentsLots of modular!
![]()
Boards look good.
![]()
-
PCB pickup at Church of the Super Serge
04/19/2018 at 19:32 • 0 commentsThis Saturday...
![]()
-
Laser Engraved NSynth Case
04/18/2018 at 19:26 • 0 comments -
Open NSynth Videos
04/18/2018 at 19:18 • 0 commentsNSynth assembly timelapse
Assembled NSynth testing
-
Semi-Assembled NSynth PCB
04/16/2018 at 03:52 • 0 commentsBoards on the way.
![]()
![]()
-
NSynth Parts Outstanding
04/09/2018 at 22:03 • 0 commentsEverything not on the assembled board:
1 Adafruit 1.3" OLED display 1 Raspberry Pi 3 1 GorillaPi Heatsinks 1 SanDisk 64GB MicroSD card 6 Potentiometers 4 Rotary encoders PEC11R-4315F-N0012 1 USB socket 1 MIDI socket 1 3.5mm audio jack 1 tall rpi gpio header 4 Self-Retaining Spacer M3 3.2mm 8 Button Machine Screws M3 12mm 8 Countersunk Machine Screw M3 12mm 4 Spacer M3 20mm
Open NSynth Super
A project to plan, purchase, and build the Open NSynth Super synthesizer.
