newdrive-
Modelling the brushless motors
03/20/2016 at 22:50 • 0 commentsOur team is split in small groups to balance the workload. I, Raphaël is part of the Wheelbase, electronics and programming group.
I just modeled the Quanum 360 kV brushless motor we will use in our build in SolidWorks. Here are some photos. Everything will be available soon in our Git repository, but we have to check everything works before doing that. In particular the motor was very difficult to measure due to it's round shape and inaccessible measurement points.
![]()
![]()
![]()
We know that we are quite short in time, so we are speeding up, the logs shall be written by the other teams, stay tuned ! (There is about one month remaining)
-
Administrative VOODOO done!
03/15/2016 at 15:14 • 0 comments![]()
At last we filled all the administrative steps required for Eurobot France !Stay tuned for the first photos of our robot ;)
-
Newsfeed page process now works perfect !
03/08/2016 at 22:01 • 0 commentsStill some work to do on .CSS
-
Website working on the test bench
03/05/2016 at 16:17 • 0 commentsJust to say that it should be working now. Tests on OpenRobotics servers needed.
![]()
-
Working on OR Website
02/29/2016 at 10:05 • 0 commentsMore particularly on the newsfeed page with Hackaday and Twitter integration.
![]()
Open Robotics Eurobot
Open Source competition robot development. You will never be alone for your contest again!
At last we filled all the administrative steps required for Eurobot France !
