Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects YodaLogic likes and follows

15.2k
7.6k
85
This project aims to build a tilt sensor that is cheap, very accurate and has a wide measuring range (up to 360 degrees).
Project Owner Contributor

A new high accuracy tilt sensor

aron-molnarAron Molnar

13k
6.1k
48
A fully hardware debounced rotary encoder.
Project Owner Contributor

Hardware Debounced Rotary Encoder

tonyTony

5.3k
5.3k
22
A hardware and software balancing cart pole.
Project Owner Contributor

ZIPY : ZIPY Inverted Pendulum Yakshave

philip-zuckerPhilip Zucker

9.7k
5k
29
Use your Android/IoS phone or tablet to control your hardware remotely with the thingSoC ESP32 board
Project Owner Contributor

thingSoC ESP32 Android/IoS GUI Control

pattern-agentsPattern Agents

4.8k
4.9k
18
Open automation system, starting with lights and occupancy sensing and expanding to encompass anything that has wires or electrical contacts
Project Owner Contributor

Home Automation System (to rule them all!)

the-hatThe Hat

4.7k
4.7k
25
Home Automation software hub that unifies home sensors and cloud services with a flexible and easy to use browser interface
Project Owner Contributor

HomePortal

deandobdeandob

22k
4.3k
47
Philips Hue is nice but expensive... now there is a cheaper way.
Project Owner Contributor

DIY Complete Philips Hue Home Automation

mariusmoteamarius.motea

15.7k
3.7k
69
Development of a robust low cost 3D printed hand prosthesis using off-the-shelf components.
Project Owner Contributor

biohand - Low cost 3D printed hand prosthesis

martin-vincent-bloedornMartin Vincent Bloedorn

3.6k
3.6k
47
An educational system designed to bring AI and complex robotics into the home and school on a budget.
Project Owner Contributor

Cardware

morningstarMorning.Star

2.7k
3.1k
4
Commander un relais iot avec ESP-01 via SmartThings
Project Owner Contributor

Relais ESP-01 iot sur SmartThings

erik-tellierErik Tellier

20.3k
2.9k
99
A new smart mirror design.
Project Owner Contributor

Reflectrum - Smart Mirror

chris-gervangChris Gervang

6.1k
2.6k
3
Raspberry Pi 3B based robot, distance sensors, and ROS.
Project Owner Contributor

Wall Following and Obstacle Avoidance

sinclair-gurnySinclair Gurny

2k
2k
13
The intent behind the Ultra Servo is to give a maker or a robotics a powerful building block.
Project Owner Contributor

Ultra Servo V2.0

patchartrandpatchartrand

1.7k
1.8k
82
When a magician rotates his magical wand and says 'Abracadabra', magic happens! This IoT Magical Wand project is inspired by this.
Project Owner Contributor

IoT Magical Wand

dixon-selvanDixon Selvan

3.2k
1.7k
12
DSO functions for a CRO
Project Owner Contributor

A digital camera for analog oscilloscopes

joseph-eoffJoseph Eoff

1.3k
1.3k
7
AUTONOMOUS ROBOT
Project Owner Contributor

VISION

timothy-vancoTimothy Vanco

1.3k
1.3k
13
Unique tool and desktop or wind sill trinket to alert when the ISS is overhead.
Project Owner Contributor

3D Printed ISS desktop beacon and IFTTT notifier

lanceLance

2.7k
688
13
This project demonstrates how to build a battery powered IoT Wi-Fi button in less than 10 min. This example controls HUE lights over IFTTT.
Project Owner Contributor

WiFi Button

sylwesterSylwester

300
373
6
A Benchy Printer for Printing Benchys
Project Owner Contributor

BenchyBot 3D Printer

andrew-kowalczykAndrew Kowalczyk

1.7k
270
15
The device is sufficiently accurate and uses minimum number of external components
Project Owner Contributor

DIY Autorange Arduino Ohmmeter

mircemkmircemk

4k
77
57
Turn any small DC motor into a powerful servo-motor with robust and accurate position, speed and torque control with this tiny controller.
Project Owner Contributor

Tiny Closed-Loop Motor Controller

mayel-sorelusMayel Sorelus

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday