0%

0%

Martin

A new member to share my first project.

Finland

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/15/2024.

My Projects

Using the IKEA RODRET wireless dimmer with external switches or to capture external signals.

Converting IKEA RODRET into a switch digitizer

How to flash the latest revision of the H801 WiFi RGBWW controller to the smart home firmware tasmota

H801 WiFi to TASMOTA

Projects I Like & Follow

The 2016 Hackaday Prize

A smart sensor Node to trigger an action on a smartphone each time a physical change is detected (temperature, displacement, click...)

Triggy - Sensor Node for Life Automation

The 2016 Hackaday Prize

This project aims to build a tilt sensor that is cheap, very accurate and has a wide measuring range (up to 360 degrees).

A new high accuracy tilt sensor

aron-molnar Aron Molnar

he arrival of small satellites that used LoRa for telemetry data has meant that less technically qualified persons, with a very low budget,

Ground station for LoRa satellites

alberto-nunez alberto nunez

Get high-resolution 3D printing by building your own.

Laser SLA 3D printer with galvo

mark-peng Mark Peng

Medium-sized 12-DOF Quadruped Robot inspired by MIT Cheetah and Boston Dynamics Spot Mini

NOMAD Quadrupedal Robot

implemented-robotics Implemented Robotics

The 2018 Hackaday Prize

A drum machine, base synth and arpeggiator that fits in your pocket. User interface inspired by classic mod tracker software.

FATCAT: Altoids Tin Mod Tracker

Connect all needed electronics to NodeMCU, add life to them with a help of programming, install HomeAssistant on PC and let's roll!

Home Automation With NodeMCU, HomeAssistant & MQTT

Hackaday Prize 2019

Convert FPV racing drone into an interceptor using Raspberry Pi

Open Source Air Defense

Hackaday Prize 2020

This is the fast ISP programmer for AVRs based on cheap stm32f103c8t6 board.

FASTUSBasp programmer for AVR with usb-to-serial

amitesh-singh Amitesh Singh

2021 Hackaday Prize

One of my most advanced projects to date. A tracked robotic development platform that [hopefully] raises the bar for hobby robotics.

Autonomous tracked robotic platform UGV

maximiliano-palay Maximiliano Palay

Supplyframe DesignLab: 2022 Hackada…

Thermionic energy conversion isn't very efficient (it's also nothing new) but they *are* photovoltaic devices you can build with a torch

Glass Tube Solar Thermionic Converters

nick-poole Nick Poole

Hackaday Prize 2019

This is a self balancing robot created by star wars fan, with autonomous behavior, FPV and remote control modes

Droid Trooper

victor-serrano Victor Serrano

An open source oximeter device for measuring SpO2

uOxy - open source pulse oximeter

ultimate-robotics Ultimate Robotics

Supplyframe DesignLab: 2022 Hackada…

Using wood waste to create 3D prints

3D printing in wood

Development Board for the new ATmega4808 Series of AVR Microcontrollers

ATmega4808 Development Board

stefan-wagner Stefan Wagner

The 2016 Hackaday Prize

A wristband able to do a full-time control of the heart rate and body temperature, log data and send alerts if any abnormality is detected

WearHealth 1.0

2021 Hackaday Prize

5 Axis articulated robotic arm. Actuated by planetary reduced open-loop stepper motors.

PROJECT-A

sixthnassau Sixth_Nassau

I was annoyed to always have to solder a 6pin connector to my boards to use my ISP programmer. So made an adapter with Pogo pins.

AVR ISP Pogo adapter

View all

Bits