0%

0%

hamblin.joe

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 07/22/2017.

My Projects

Arduino controlled Toilet using wiper motors and wave shield, range finder. Eyes made out of ping pong balls with green LEDs

Captain Underpants Toilet

This was created to be a 4H project. The kids would learn to program, understand what a PWM signal was and how to solder

Analog meter Arduino Clock

Build 8.2 ft Serial Addressable LED Display. Will be used to display message and basic animation. Leading 4H club project

Very large LED Display

Projects I Like & Follow

Building computers on Arduino platform is fun. How far can we take this?

Arduino Desktop

dylan-brophy Dylan Brophy

A clock that uses electro mechanical flip displays

7 Segment Flip Display Clock

spencer Spencer

The DIY project describes how to make a 5W generator without cogging torque or friction looses

Contactless 5 Watt bike dynamo generator

thomas-d Thomas D

Easily connect several 7-Segment displays using a single wire to your microcontroller.

Addressable 7-Segment Displays

sean-hodgins Sean Hodgins

The 2017 Hackaday Prize

Tools for students, makers, designers and artists to quickly demonstrate interactive concepts.

SnapBloks

ekawahyu-susilo Ekawahyu Susilo

I built a Persistence of Vision speed indicator for my dog, using an Arduino, a few LEDs and resistors, and less than 40 lines of code.

Dog Speedometer

Fading LED with ATtiny85- A Candle like Circuit Sculpture using Attiny85,LED,3V Coin cell and some copper wires !

Fading LED with ATtiny85

amal-mathew Amal Mathew

Ladder logic program for a 4 levels elevator, with automatic doors and double speed, tested with a PLC simulation software

Elevator controlled by PLC

andrea-de-napoli Andrea De Napoli

The 2017 Hackaday Prize

A simple and tough cnc frame made from low cost hardware store parts and affordable electronics

The Peoples CNC Frame

The 2018 Hackaday Prize

Electromagnetic Lifting Module

ELM

3D printing a 3D printer

Prusa i3 Mk2 Clone

hari-wiguna Hari Wiguna

Open Source Hardware for IoT Embedded Applications

nRF52832 Micro Development Kit

boktech BokTech

The 2017 Hackaday Prize

To research and experiment with Robotics, AI, Transportation, IoT, Security and Mobility, Healthcare, Education etc

Robot

anil-pattni Anil Pattni

Retro Style 1-Bit Trainer Board based on MC14500

PLC14500

nicola-cimmino Nicola Cimmino

Eight Steps to complete an interesting time-killing Whack-a-Mole Game!

How to DIY a Whack-a-Mole Game with Cardboard Box

Power banks are useful things. If you have an iPhone, you probably know that the battery lasts about 1 hour.

How To Make Your Own Personalized Power Bank (3D P

An Arduino-based lightsaber with sound effects and an accelerometer

Lightsaber prop with sound effects

Matthias Nigmann

Seven segment display with two digits using addressable LEDs

7-Segment Neopixel Display Module

matt-deeds Matt Deeds

View all

Bits