Hackgyver *DEFINITELY CLOSED*

Hello ladies and gentlemen/robots/everyone, it's been a while since we have posted the last log !
So we proudly present you today a 3D version of our logo.
Tell us what you think about it in comments, but we have also some important news to pass.

We are now also open Friday night and a digicode has been installed on the entrance, if you are an external visitor please inform us first about your visit at contact☆hackgyver.org to avoid being stuck in front of the door !

These things said, Hackgyver successfully renewed his association committee (president and treasurer) during the general assembly who occur each year in order to elect the new council.
Congratulation to the new elected council of 19 Nov 2015, may the force be with us for the 2016 season !

RetrohAsh and Xylitol, formerly president and treasurer of 2014-2015.

To get back on the logo fork, we designed it with Solidworks, full resolution images can be found on our Wiki, and the .STL on Thinginverse.

Flat version:

3D Print:

May be used/distributed as badge and pin's for future events !

Les locaux seront fermés pendant les vacances de noël, soit du 20/12 au 04/12
Bonne fête de fin d'année a tous, et à l'année prochaine !

After seeing this, we thought it was a good idea to make another workshop project.
AVR are totally awesome and making some boards of Craft is a good idea to honor the demoscene and LFT.

Here is an Eagle typon that one of our member did because no 'proper' typon was available:

Ratness:

Please note that we use a terminal block instead of a 9V battery snap connector like in the board of Linus Akesson, our rooting design goes directly to the AVR, so don't give him 9V.
Board layout can be found here: https://github.com/Xyl2k/Craft-PCB-version

PCB pictures:

Finally in action:

Comming soon to the hackerspace...
EMP generators workshop: introduction to coil winding, soldering and electromagnetism.
From the most basic circuit to more advanced circuits with timer.

We got a donation an old Heathkit GR-78, the station wasn't functioning..
well, let's fix it.

After some small operation the radio work fine again !
Video here:

Take some 3D-Print also !

Now available to the hackerspace !
We received recently some bottles of beer generously offered by WorldCoin (Thanks guys!)

Old but gold, here is one of our video did during an event we organized to demystify 3D Printers to the public.

https://www.youtube.com/watch?v=jMDNnJ4jtfk

Comming soon to the hackerspace !

https://hackaday.io/project/2938-Weather-station