Shorty85

I've been porting this the project #Shorty - short circuit finder form @jaromir.sukuba to the ATTiny45/85.

I have been working too on a single sided board for the project. The board takes 3.3" x 0.6" (roughly 84mm x 16mm).

Discussions

danjovic wrote 10/17/2018 at 03:19

Hi @valterviktor , I have just routed a PCB for Jaromir's project and ported the code, but since I have never assembled the board I never tested it, so no guarantee that if I send you an hex it will work, sorry.

Are you sure? yes | no

meestermole wrote 09/21/2018 at 19:17

I would also like to build this. I have printed the board, and downloaded your schematics. I will program the Tiny85 with an Arduino. I really hope this works!

Are you sure? yes | no

meestermoley wrote 10/02/2018 at 23:15

Sweet - Boards came in yesterday - expecting parts tomorrow

Are you sure? yes | no

meestermole wrote 10/04/2018 at 15:32

I populated the board, however my problem is with programming the ATTint85 - in Arduino IDE i get many errors like 'UBRR0H' is not declared in this space. Any thoughts? Hopefully you're still active here. My coding skills are lacking

Are you sure? yes | no

danjovic wrote 10/17/2018 at 02:45

Hi @meestermole I have worked on the PCB then ported the code to C. I haven't touched the arduino code, it was inherited from the original project when It was forked.

I suggest you to test the C code or use it as a basis to modify the arduino code.

Are you sure? yes | no

valterviktor wrote 01/15/2018 at 10:12

Hi!

I would like to build this circuit, can you send your attiny85 hex code?

Thanks.

Are you sure? yes | no

Nanite Single Sided V2: Eagle and Kicad

​Generating video signals on a microcontroller with correct amplitude and impedance.

Discussions

Become a Hackaday.io Member

Generating video signals on a microcontroller with correct amplitude and impedance.