Close
0%
0%

The 'Configum' module

A full FPGA system in one square inch area

knvdKn/vD
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
1.4k views
13 comments
31 followers
View Gallery
This tiny module has Spartan-6 FPGA, full power for it (works from any power outside in the range 3.3...20V, and even generates 3.3V for external user circuits), configuration memory, 64Mbytes DDR, microSD holder, 24MHz clock oscillator, JTAG pads, reset button, 8-bit configurable universal ADC/DAC/IO port, and even four on-board user-controllable LEDs.

And this whole this is... only 25x25mm big and fits into a standard PLCC-68 socket.

Applications - everything from industrial control to soft-core modular computers.

Tindie store: https://www.tindie.com/products/KnivD/configum-fpga-module/
GitHub: https://github.com/knivd/OSH/blob/master/Configum.zip

Configum.pdf

Datasheet

Adobe Portable Document Format - 395.21 kB - 09/21/2016 at 11:26

Preview

configum_r1601.pdf

The schematic of Configum

Adobe Portable Document Format - 299.37 kB - 03/05/2016 at 08:43

Preview

Enjoy this project?

Share

Discussions

Thierry Deval wrote 02/18/2020 at 15:45 • point

Heh, someone took your stuff seriously : https://www2.hdl.co.jp/en/plink/xp68-06.html

Almost identical except the µSD slot. ;-)

Sorry for reviving the thread.

  Are you sure? yes | no

Kn/vD wrote 02/18/2020 at 16:27 • point

Well, that's the point of sharing in first pace :-)

Good luck to them

  Are you sure? yes | no

fabian wrote 07/22/2018 at 17:07 • point

interesting but for emulator c64 or zx spectrum i need screen, keyboard and memory, power. No this is not completly solution. not for me

  Are you sure? yes | no

Kn/vD wrote 06/04/2017 at 11:14 • point

Configum-2 is almost ready for presenting now.
A game changer! 

Stay tuned... :)

  Are you sure? yes | no

Bartosz wrote 01/27/2017 at 17:55 • point

Interesting but... please create this same module but with few normal procesor. For example 

one FPGA and 5 asynchronitious processor M0 ARM. FPGA sending job to each processor , managing memory io etc. This will be faster than arm M0 with 5 cores.

(look at Epiphany project http://www.parallella.org but asynchronic)

  Are you sure? yes | no

Kn/vD wrote 01/27/2017 at 19:20 • point

I already did. The new Configum-2 is already in the factory. What will be on it... I am not going to reveal yet, but it is going to be awesome! Just wait a couple of weeks.
Oh, and this current one really works miracles at my job by the way. A couple of great FPGA engineers achieved a lot of serious stuff with it.

  Are you sure? yes | no

Kn/vD wrote 09/18/2016 at 15:48 • point

Submitted the store page for Configum to Tindie, just waiting for approval. Check it out in a day or two... Thanks

  Are you sure? yes | no

Domen wrote 03/19/2016 at 10:24 • point

How much would such a module cost produced @ 1000 pieces?

  Are you sure? yes | no

Kn/vD wrote 03/19/2016 at 10:30 • point

Around $60, I think

  Are you sure? yes | no

John wrote 08/31/2016 at 19:23 • point

Any chance you can get that much interest for completed boards? (Or even 100?). It is a pretty nice set up! Impressive!

  Are you sure? yes | no

kodera2t wrote 03/08/2016 at 11:36 • point

Wonderful!!!! Cosmic possibility in one square inch!!!!!!

  Are you sure? yes | no

Yann Guidon / YGDES wrote 03/05/2016 at 11:37 • point

Now you need to make a new project page for your CPU7 processor ;-)

  Are you sure? yes | no

Kn/vD wrote 03/05/2016 at 11:41 • point

will do, soon ;-)

  Are you sure? yes | no

Similar Projects

Demo Flex Module project to provide wearable LED strip lighting with motion feedback and bioelectric monitoring.
Project Owner Contributor

Dance Kit

chris-hamiltonChris Hamilton

We know low power Wi-Fi is powerful and competitive in the IoT applications, more and more people want to FCC/CE/RoHs certificated module
Project Owner Contributor

Low Cost FCC/CE/RoHs Wi-Fi Module WT8266

tagTag

Zigbee Stick based on RF-BM-2652P1/P2 Module from RF-STAR,with CC2652P on board.
Project Owner Contributor

Zigbee Stick v4

raduRadu

The new age of MCU&FPGA-based single-board computer & IOT development platform
Project Owner Contributor

Node.IOT - aka Aerobot II

glensonggglensongg

Does this project spark your interest?

Become a member to follow this project and never miss any updates

By using our website and services, you expressly agree to the placement of our performance, functionality, and advertising cookies. Learn More

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "The 'Configum' module", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.