Quantity   Component name
1 × dayton ND20FA-6 tweeter
1 × Tangband W3-315SE (W3-315E will work as well) fullrange speaker used for the high end (€22)
1 × Dayton DA175-8 7inch mid-woofer (€30)
1 × Monacor DN-1 Crossover (€6)
1 × 1ohm 5W ceramic resistor for limiting high frequencies, need to replace to 2,7ohm (€1)
1 × 6" long pvc tube (2" inner dia) as bassreflex port (€3)
1 × 1,5mm ofc cable (2Meter) for internal wiring (€2)
1 × 9MM MDF woof (full sheet) for the enclosure (€20)
1 × Black matte paint to paint your enclosure (€10)
1 × dampening wool i picked real sheepwool (€8)
10 × cable clamps (€2)
1 × woodglue for sealing edges (€6)
60 × 4x30mm woodscrews to srew it all together (€8)
1 × speaker sealing tape you don't want to glue your speakers in i suppose? (€2)
1 × filler for covering the screws you don't want to look at ugly screws i think? (€6)
4 × rubber feet (€4)
1 × 8r2 ohm resistor hooked between the tweeter's + and -
1 × 2.2UF 100v cap acts as highpass filter for the tweeter