arduino ZERO M0 compatible keychain AtSamD21E18

The 2016 Hackaday Prize

Description

Native 3.3V, many sensors, modules and SD cards are working on this voltage level
I want small board => more fun without shields => integrate some basic components on board
user button
user led
micro SD Card reader (not supported in arduino IDE now)
RGB LED
I think really nice shape :)
micro shields (coming soon > touch, encoder, 7 segment ...)

Features

Atsamd21E18 (TQFP32 > same size as atmega328), more soldering fiendly than Atsamd21G18 (LQFP48)
no EDBG chip, programming via native usb only
256kb flash
micro SD card reader

Pinout:

Edge header: GND, 3.3V,SDA,SCL,RESET, RX,TX,PA04,PA03,PA02(10bit DAC)
Left wing: GND, 3.3V, PA08, PA09, PA14
Right wing: PA28 (Usb host ID), GND, JTAG (reset, gnd, 3.3v, swc,swd)
Powered from usb, it is great, you can use any your phone charger, powerbank etc...
No jtag programmer required, board have integrated USB bootloader

vote what is better Winxi or this ???

Discussions

fabian wrote 07/21/2018 at 20:13

please add encrypting sd card or one time password like yubikey

Are you sure? yes | no

Brijesh Sondarva wrote 09/01/2017 at 12:28

hi is it working fully as a SD Card reader like as market made PC SD Card reader..???

Are you sure? yes | no

bobricius wrote 09/01/2017 at 14:56

no sd card not working, Is not supported in arduino IDE and I am bad programmer to make driver

Are you sure? yes | no

Hendra Kusumah wrote 03/27/2016 at 14:49

This project remind me to digispark on steroid. You have my skull sir

Are you sure? yes | no

arduino ZERO M0 compatible keychain AtSamD21E18

Become a Hackaday.io member

Just one more thing

Description

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member