Quantity   Component name
1 × Some components (i.e. bolt lengths) are dependent on the parameters you choose for your machine, consult the .scad file for spec Consult the echos in the .scad file for the length and quantity of each bolt you'll need since these will depend on the specs you choose for the machine
85 × M5 Socket Head Cap Screw Multiple Lengths, SCAD file tells you what lengths you'll need for your machine
6 × M3 Bolts Used to mount the motors.
3 × Nema 17 Stepper Motors You can use other sizes if you wish, just change the stepper motor parameter in the .scad file.
1 × M5 Threaded rod Length depends on your Z axis,
2 × Steel Tubing (Z axis) Steel tubes cut to length for your Z axis, these should be the same length.
6 × Steel Tubing (XY axis) Steel tubes cut to length for your XY axis, should all be the same length.
85 × M5 Nut Something to keep these from vibrating loose, like nylock or locktite is a good idea.
88 × M5 Washer
44 × 625 Bearing
14 × 3D Printed Parts The parts and number of each you need to print are listed near bottom of the .scad file
1 × Z Coupler Something to couple your z axis threaded rod/leadscrew to your z motor shaft
1 × Braided Fishing Line/Other cable or rope to drive the axis The length you'll need varies depending on the size of your machine.
1 × Control Board I'm using a smoothieboard clone because that's what I have on hand. It's the one component I splurged on because I didn't want to be dealing with trimpots for the stepper current.
1 × Tool Head Could be anything; laser, router, spindle, extruder. I'll be using a rotary tool for budget reasons.