First test of the new z-axis construction

A project log for OpenExposer

An affordable Arduino controlled multipurpose laser exposing device. Use it for SLA Printers, PCB Exposing, Laser Harp etc.

Mario Lukas • 05/31/2014 at 09:53•1 Comment

Hooray, the first test result of the new z-axis contruction with Spot-A-Materials Spot-GP resin looks good. Stage leveling is easier now. I can't wait to test MadeSolid's resin. There are some bugs in the host software. And i have to switch from my own binary protocol to a gcode compatible protocol.

Previous log

Completed the new build stage

05/28/2014 at 09:21 • 0 comments

Next log

Open Exposer and PCB exposing

06/10/2014 at 08:43 • 0 comments

Discussions

Mario Lukas wrote 05/31/2014 at 09:56

By the way the test file is a 8x8x3 mm cube. As you can see on the picture the dimensions are not matching. But it can be fixed by changing the stepper settings in the firmware config.

Are you sure? yes | no

First test of the new z-axis construction

Completed the new build stage

Open Exposer and PCB exposing

Discussions

Become a Hackaday.io Member