Instructions | Mind Controlled Robot

21

Step 21

Connect the dongle’s GND to Arduino’s GND
22

Step 22

Turn both the Mindwave headset and Arduino
23

Step 23

The LEDs in the Mindwave and the RF dongle will be red initially
24

Step 24

Pair the RF dongle and the Mindwave headset by sending the instruction 0XC2 to the RF dongle from Arduino
25

Step 25

Once they are paired the LED in both the Mindwave and the Arduino turns blue.The Arduino is ready to received instruction from the Mindwave now
26

Step 26

1. Load the Arduino Program into Arduino.
2..Read the attention level received from the Mindwave through the RF dongle.
3. If the attention level is greater than 50 (when the user is focusing), move the motors of both the servos forward.
4. If the attention level is less than 50, move the motors back

Mind Controlled Robot